You’ve got more tech to think about than you realise…
Right. So you’ve set your goals, budgeted accordingly, written (most of) the show, sorted your marketing and had a crack at some press. Now, we start prepping for actually turning up at the Fringe.
Show tech at the Edinburgh Fringe can get stressful very quickly if you’re not prepared for it, even if your show is just you, a mic stand, and an hour of material. A lot of Fringe venues are temporary or recently built. The techs are doing an incredible job of holding together the chaos of hundreds of shows in any given space, especially in the first week, but they’re stretched. Things can go sideways fast if you haven’t done the groundwork.
A quick caveat before we get into it: every venue runs its tech setup differently, so not all of this will apply to you. Treat this as a prompt to seek out the right info for your specific venue and have those conversations early. If you’re at one of the bigger paid venues, you may have already filled in a technical questionnaire fairly recently. That’s a good start, but it’s worth revisiting. Things change, and it’s much better to know what you’re walking into than to assume.
CHECK YOUR VENUE SPEC
The first thing to do is find and read your venue’s technical specification.
Depending on your venue, this will be in a different place. Check Eventotron if your venue uses it. Check the performer info section on the venue website, where you’ll usually find spec documents and photos of the space. Go through it, look at the sound and lighting setup, and note what’s available.
If the spec looks overwhelming and you’re not particularly tech-minded, just go through it as best you can and Google anything you don’t understand. These documents look a bit frightening, but you can get your head around them fairly quickly. Can’t find a spec? Email your venue contact and ask for an overview.
STAFFING
Most paid venues will offer you a technical operator at a cost. This can range from around £12 to £30 per show, usually plus VAT at the paid venues, so check what that is and make sure it’s in your budget.
Alternatively, you can hire a freelance tech yourself. The going rate for a stand-up show is roughly £25 to £30 per show.
There are genuine pros and cons to both.
A venue tech means you don’t have to think about recruitment or managing another person. They know the space really well, which counts for a lot. And if they’re sick, it’s the venue’s problem to sort a replacement.
Hiring your own tech means you get the same person every single day. Within the first week they’ll know your show inside out, they’ll know you, and they can become a creative collaborator in a way that a rotating venue tech can’t. That consistency is worth a lot over a four-week run. The downside is more work, sometimes more money, and if they’re off ill or for any other reason, you’re the one scrambling.
Worth considering both options and making a call ASAP.
(If you’re on the free fringe or at a PBH venue, I’ll be upfront: the bulk of my experience is with the paid venues. Check with your venue contact about what’s available and how it works, because it varies a lot.)
SOUND
Even if you’re doing pure stand-up with no particular audio requirements, spend a bit of time thinking about your sound setup.
At bare minimum, find out whether your venue provides a playback device and whether they can use Spotify. Some venues can take a playlist link without any issue. Others need MP3 files, partly because venue Wi-Fi can be extremely unreliable during the Fringe with thousands of people all descending on the same postcodes. Find out early and be prepared either way.
Then think about what you actually want.
Atmosphere while the audience comes in. A playlist playing as people take their seats goes a long way to making the whole thing feel like a show rather than just a room filling up. Easy to do, and worth doing.
Walk-on music. Do you want music playing as you walk out? If yes, where does it start in the song, and how will your tech know when to bring it down? You’ll want a clear cue for this, which you’ll run in the tech rehearsal.
A note on QLab. If you want a bit more control over your audio cues, QLab is worth looking at. It’s Mac-only though as a heads up. But there’s a free version which is more than enough for a basic stand-up setup, and a quick Google will find you the download and loads of free tutorials on YouTube. In simple terms, it lets you set up a doors playlist that fades smoothly into your walk-on track at a specific point, then a second button brings that down to a fade once you’re at the mic. Much cleaner than someone trying to manage it manually on the fly. If the thought of software feels like too much, there are other ways to do it, but QLab is simpler than it looks and worth an hour of your time.
A word on PRS. Keep an eye out for an email from the Fringe Society in early August asking you to fill in your PRS information. PRS is the Performing Rights Society, who handle music licensing in the UK. Walk-on and walk-off music is typically charged at around 0.2% of your box office, which is manageable. Fill this form in. If you don’t, you can end up being charged a flat 4% instead, which is a very different bill.
LIGHTING
If your show is fairly straight stand-up, you might assume lighting is just “on”. But you have more control here than you might think, and it’s worth using.
A lighting state is a pre-programmed look across all the lights in the space, set up by your tech in advance so they just hit “next” rather than manually adjusting anything during the show. Most venues won’t have anything pre-programmed for your show by default. That’s yours to think about and set up in your tech rehearsal.
Have a think about what states you might want. An ambient look while the audience comes in. A blackout before you walk on. A walk-on state with a bit more drama, some colour. A show-state that suits your performance, and where you can see the amount of the audience you actually want to see.
This doesn’t have to be complicated. Some well-chosen colours at the back of the stage can genuinely change the feel of a show without any extra cost. Think about it before the rehearsal so you’re not making decisions on the fly in a limited window of time.
OTHER EQUIPMENT
If you need anything outside a basic setup, check what’s available and what it’ll cost. Projectors, screens, wireless mics, headset mics, any of these will likely come with extra hire charges, especially at a paid venue. Get this confirmed early and make sure it’s in your budget, because the quote can come in higher than you’d expect.
YOUR TECH REHEARSAL
Most venues will offer you a slot before your first show for a technical rehearsal. Treat this time as genuinely valuable. You’ll often only get an hour, and that hour can disappear very quickly if you go in without a clear plan.
Before you show up, write down exactly what you need to get through. A list means you leave the rehearsal having covered everything, rather than remembering at midnight that you never sorted out where you’re walking on from.
Here’s what that list should include:
Mic and stage setup. Where is the mic? On a stand, handheld, clipped? Do you want it at a certain position on the stage? Sort this so it’s consistent every day.
The self-announce. At the top of the show, before you walk on, someone usually announces you: “Please welcome to the stage…” That could be your tech saying it over a mic from offstage, you doing it yourself from the wings, or you deciding to skip it entirely. Have a decision made before you go in. It’s a small thing but it sets the tone.
Your entry point. Where are you walking on from? Run it at least once so there are no surprises for your first show.
Music. Run through your pre-show playlist, your walk-on track, and any other cues in the order they happen. Make sure you and your tech are clear on what the signal is for each transition. A thumbs up from the wings, a nod, a specific moment in the music. Work this out.
Lighting. Run through each state in sequence, ideally at the same time as the music so the transitions feel seamless. Check that the amount of audience you can see is what you actually want, and be specific if anything needs adjusting.
How does the show start? How will you know it’s time to go on? Will someone come to get you? Is there a music cue? Will the tech signal you? Work this out before the first show and you’ll walk on a lot calmer than you would otherwise.
USE THE CHECKLIST
To make all of this easier, we’ve put together a downloadable tech rehearsal checklist that covers everything above: what to sort before you go in, and what to run through on the day with your tech. Get it, along with the rest of our Fringe Survival freebies (the editable budget, the promo planner and an example press release), then fill in Part One in your own time, and you’ll arrive at your tech rehearsal knowing exactly what you want.
WHEN THINGS GO WRONG
They will, at some point. That’s just the Fringe.
Mics cut out mid-sentence. Walk-on music doesn’t play. The lights do something nobody planned. It happens to everyone, and it happens a lot in week one when techs are still getting to grips with a space they’ve only just built.
Your audience is almost always on your side. If something goes wrong, try to make it funny, stay as calm as you can, and keep going. A confident “well, this is going brilliantly” will get you much further than visible panic. Your tech will be working to fix it. Trust them.
Do everything you can to prevent it: the spec, the brief, the rehearsal, the cue list. And then accept that you can do all of that and something will still go sideways at some point. The audiences who see a bit of tech chaos often end up having the best time. It usually makes a good story.
NEXT UP
Right. So at this point in the series, you’ve sorted your goals and budget, you’ve written the show, promoted it, had a go at press, and now you know what you’re doing on the tech front.
One more to go. Next month we’re covering final prep: what to actually expect when you arrive in August, how to work with your venue team, flyering, review-chasing, all of it. See you then.